Mostly apart

Well I pulled all of the bolts out and separated the motor from the holder. Photo below shows just the holder. Now have to get it cleaned up and ready for paint.

Once the power unit was off the holder I separated the lower unit. It came of pretty easy. Here is the power unit with the lower unit removed. The little hole in the side with the cover missing is where you loosen the screw to disconnect the shift shaft actuator.

Put the lower unit on the stand and pulled the water pump. All the bits and pieces are in good shape. Of course it needs a new water pump.

Next step is to find all the parts, probably on eBay, to actually perform the extension.